If you like the look of weathered wood, Vivid Silvered is perfect for you. Thermally modified spruce is brushed and prepainted with either a light or dark silver-gray color. Over time, the wood beneath the coating becomes visible as the paint wears off, eventually turning gray. Vivid Silvered doesn’t require any specific maintenance – it just needs to be cleaned every few years.
Our extremely durable state-of-the-art products are also quick and easy to install. We have developed innovative installation systems and methods that offer solutions to some of the most pervasive problems in the woodwork industry. And most importantly, they save your time and money.
PaCS (Press and Click System) clip strip fastening system is the easiest and possibly the fastest decking installation system in the world. Using concealed clip strips for installation ensures an aesthetically pleasing final result – no visible screws or screw holes. The PaCS system can only be used to install decking boards with a special installation groove (Thermory products with the letter J in their profile designation). Pre-grooved boards are easy to align – you can create a flawless, durable result in minutes. That’s right – in just minutes.
Watch installation videos:
PaCS CLAD, C7J
PaCS ALU RAIL START, C23J
Most of our products can be ordered with matched tongue-and-groove ends. Matched tongue-and-groove ends allow boards of different lengths to be installed without the need to rest them on joists. This creates less waste, reducing labor costs and shortening the installation time.
We recommend using only stainless steel screws for visible fixing.
Screw holes must be pre-drilled into thermally modified Thermory Ash decking boards. The diameter of the drill bit must be 1 mm bigger than the screw diameter. Drilling a hole keeps the wood from splitting when the screw is inserted. When fastening the boards, make sure not to screw the screws too deeply into the wood as this will allow dirt and debris to accumulate in the recessed area. On the other hand, if screw heads are left sticking out, the decking is not properly fixed to the substructure, and the projecting screws may cause injuries.
Watch installation videos, hidden fixing with screws:
IGNITE C26, CP3 CORNER PROFILE
VIVID C26, END-MATCHING
VIVID C11-S
DRIFT C15
MIX&MATCH
Thermory’s Vivid coated cladding selection is a high-quality solution that makes any building stand out from the crowd. The spruce and pine products undergo an intense thermal modification process that uses only heat and steam to give exceptional stability and durability.
The lightweight, easy-to-install boards are brushed to enhance their natural pattern. For a long-lasting finish, the wood is then coated with water-based paints that are environmentally friendly and have been tested in the harshest climates.
Real wood cladding has many functional benefits as well as a charming aesthetic. But if you are looking to make a bolder statement with your exterior, coating your timber cladding with some striking colour might just do the trick.
Finding the best solution to clad buildings is important for several reasons – as well as defining the look and feel of your design, it also has a major...
Natural wood can be used in many different ways. The beauty and versatility make wood unequalled building material. As both an interior and exterior design...
Thermally modified wood, often referred to as thermowood, is real wood enhanced using only heat and steam to improve its durability, dimensional stability,...
With rising concerns about climate change, the world community’s responsibility to reduce our carbon footprint rests with each and every individual and...
To ensure that your Thermory cladding retains its natural warm and authentic character, it’s important to apply the correct maintenance techniques. The...
Real wood cladding has many functional benefits as well as a charming aesthetic. But if you are looking to make a bolder statement...
In 2022, the global megatrend of sustainable architecture and building practices will continue. Architecture trends influence the choice of materials both...
