Premium products deserve the best installation solutions.
Our extremely durable state-of-the-art products are also quick and easy to install. We have developed innovative installation systems and methods that offer solutions to some of the most pervasive problems in the woodwork industry. And most importantly, they save your time and money.
The substructure must last at least as long as the decking.
We recommend using joists of the same durability class as the decking boards you have chosen for the substructure. This way, the substructure will endure as long as the decking.
- Thermory Ash and Spruce – durability class 1 (25+ years)
- Thermory Pine – durability class 2 (up to 25 years)
End-matching joints – less material loss!
Most of our products can be ordered with end-matching joints. Why is end-matching good? End-matching joints allow boards of different lengths to be installed without the need to rest them on joists. This in turn creates less waste, reduces labour costs and shortens the installation time. You no longer need to think about installing joists or throw away piles of product scrapped during installation.
Clips for concealed-fixing installation
We offer various clips to create a beautiful screw-free decking surface. All these clips also ensure the necessary airing between boards, which is required to avoid moisture damage. The clips are fastened to the substructure with stainless steel screws.
PaCS – probably the world’s easiest and fastest installation method!
PaCS (Press and Click System) clip strip fastening system is the easiest and possibly the fastest decking installation system in the world. Using concealed clip strips for installation ensures an aesthetically pleasing final result – no visible screws or screw holes. The PaCS system can only be used to install decking boards with a special installation groove (Thermory products with the letter J in their profile designation). Pre-grooved boards are easy to align – you can create a flawless, durable result in minutes. That’s right – in just minutes.
Visible fixing with screws
We recommend using only stainless steel screws for visible fixing.
Screw holes must be pre-drilled into thermally modified Thermory Ash decking boards. The diameter of the drill bit must be 1 mm bigger than the screw diameter. Drilling a hole keeps the wood from splitting when the screw is inserted.
When fastening the boards, make sure not to screw the screws too deeply into the wood as this will allow dirt and debris to accumulate in the recessed area. On the other hand, if screw heads are left sticking out, the decking is not properly fixed to the substructure, and the projecting screws may cause injuries.
QuickDeck and Herringbone decking modules allow particularly fast and easy installation
QuickDeck decking modules do not require a substructure for installation
Building a deck is super easy with Thermory QuickDeck decking modules. No substructure, tools or screws required. These decking modules have weatherproof plastic supports underneath which are used to connect modules with each other easily. The beautiful and screw-free decking is an ideal solution for roof decks and apartment building balconies. Two modular solutions are available for creating your desired floor pattern.
Classic herringbone pattern quickly and easily!
Installing a stylish herringbone deck is quicker and easier with our Herringbone module system. After only a third of the time it used to take, your deck is ready!